The Oppo Find X3 Pro uses a 6.7-inch curved LTPO AMOLED panel with a 120 Hz refresh rate, which makes its screen replacement a curved-panel job that needs care. An Oppo Find X3 Pro screen replacement means opening the phone, disconnecting the battery, and fitting a new curved OLED assembly while transferring the punch-hole camera. Digi4u stocks tested Find X3 Pro screens.
Last updated: August 2026 ¡¤ Reviewed by the Digi4u repair team.
About this guide: based on hands-on bench testing and repair experience; confirm model specifications with the supplier before ordering.
The Find X3 Pro screen specs
The Find X3 Pro uses a 6.7-inch curved LTPO AMOLED panel with a 120 Hz refresh rate, a punch-hole front camera and an under-display fingerprint sensor. Replacement screens come as full assemblies in original-pulled, refurbished and aftermarket grades.
| Specification | Value |
|---|---|
| Panel | 6.7″ curved LTPO AMOLED |
| Refresh rate | 120 Hz |
| Camera | Punch-hole front |
| Sensor | Under-display fingerprint |
Confirm the model number before ordering, because the Find X3 Pro panel is not shared with the Find X5 range.
Common Find X3 Pro screen faults
The most common faults are cracked curved glass, lines or blotches after a drop, touch failure, and burn-in on heavily used panels. The curved edges crack first because they take the impact.
Lines and blotches point to panel damage, while burn-in shows as ghost images on grey screens. Rule out water damage before ordering and test in safe mode.
Find X3 Pro screen repair differences
The curved LTPO panel is the skill step, and the punch-hole camera and the under-display fingerprint sensor are the two model-specific transfer points. The opening sequence is standard for curved flagships.
Because the Find X3 Pro is an older flagship, match the repair price to the phone’s current value and check the battery health with the quote.
Post-repair testing checklist
Test touch across the full screen, the curved edges, brightness, the punch-hole camera, the fingerprint sensor, the earpiece, the proximity sensor and the microphones. Confirm the 120 Hz refresh feels smooth.
Run the full test while the phone is open. If the fingerprint sensor fails, the flex is not seated or the panel is incompatible.
The standard process
The standard screen replacement opens from the rear: isolate the battery first, release the assembly, fit the new part and test before resealing.
The full tool list is in the screen repair tools and preparation guide, and the opening technique is covered in the safe phone opening guide. The model-specific risks for this phone are covered above.
Digi4u workshop notes
The Find X3 Pro is another curved flagship where the curve and the fingerprint sensor are the two tests that matter. Our rule is the same as every Oppo curved panel: tested assembly, even seating, and a full test before sealing. Check the battery and price against the phone’s value.
¡ª Digi4u repair team ¡¤ reviewed by our in-house technicians (bench-tested, August 2026)
Conclusion
The Find X3 Pro is a curved LTPO AMOLED repair that rewards a tested panel and even seating. Match the model, test the fingerprint sensor and refresh rate, and check the battery with the quote. Shops can order Find X3 Pro screens from Digi4u.
Frequently Asked Questions
Is the Find X3 Pro screen curved?
Yes. The Find X3 Pro uses a curved LTPO AMOLED panel with a 120 Hz refresh rate.
Can I use a Find X5 screen on a Find X3 Pro?
No. The two generations use different panel sizes and connectors, so the parts are not interchangeable.
Why is my Find X3 Pro fingerprint sensor not working after the repair?
The under-display fingerprint sensor requires a compatible panel. Check the flex seating or confirm the panel supports the sensor.
