The OnePlus 11 uses a 6.7-inch curved LTPO3 AMOLED panel and the OnePlus 12 uses a 6.82-inch curved LTPO AMOLED panel, both with a 120 Hz refresh rate. A OnePlus 11 or 12 screen replacement means opening the phone, disconnecting the battery, and fitting a new curved OLED assembly while transferring the punch-hole camera. Digi4u stocks tested OnePlus 11 and 12 screens.
Last updated: August 2026 ¡¤ Reviewed by the Digi4u repair team.
About this guide: based on hands-on bench testing and repair experience; confirm model specifications with the supplier before ordering.
OnePlus 11 and 12 panel differences
The OnePlus 11 uses a 6.7-inch curved LTPO3 AMOLED with a 120 Hz refresh rate, while the OnePlus 12 uses a 6.82-inch curved LTPO AMOLED with a 120 Hz refresh rate. The models share no screen parts, so confirm the exact model before ordering.
| Model | Display | Repair note |
|---|---|---|
| OnePlus 11 | 6.7″ curved LTPO3 AMOLED, 120 Hz | Curved panel fitting |
| OnePlus 12 | 6.82″ curved LTPO AMOLED, 120 Hz | Larger curved panel |
The curved panels are the skill step on both models, and the punch-hole camera and the under-display fingerprint sensor are the model-specific transfer points.
Common OnePlus 11 and 12 screen faults
The most common faults are cracked curved glass, lines or blotches after a drop, touch failure, and dead pixels. The curved edges crack first because they take the impact.
Lines and blotches point to panel damage, while a clean image under cracked glass usually still means a full assembly because of the bonded frame. Rule out water damage before ordering and test in safe mode.
OnePlus 11 and 12 screen repair differences
The curved panel fitting is the skill step, and the punch-hole camera and the under-display fingerprint sensor are the two model-specific transfer points. The opening sequence is standard for curved flagships.
The OnePlus 12 is a current flagship, so the repair is worth doing for most owners and the grade conversation matters: an original-pulled or refurbished curved panel is the safer choice on the curve.
Post-repair testing checklist
Test touch across the full screen, the curved edges, brightness, the punch-hole camera, the fingerprint sensor, the earpiece, the proximity sensor and the microphones. Confirm the 120 Hz refresh feels smooth.
Run the full test while the phone is open. If the fingerprint sensor fails, the flex is not seated or the panel is incompatible.
The standard process
The standard screen replacement opens from the rear: isolate the battery first, release the assembly, fit the new part and test before resealing.
The full tool list is in the screen repair tools and preparation guide, and the opening technique is covered in the safe phone opening guide. The model-specific risks for this phone are covered above.
OnePlus 11 and 12 model notes
The OnePlus 11 uses a 6.7-inch AMOLED panel with a 120 Hz refresh, and the 12 uses a 6.82-inch LTPO AMOLED with a higher peak brightness. Both place the fingerprint sensor under the display and carry the alert slider on the frame.
The curved panels need even heat and a careful pick path, and the larger camera island on the 12 sits over the battery area, so the rear shell must be handled with care when the phone is opened. Confirm the exact model before ordering, because the 11 and 12 panels are not interchangeable, and the flex layout differs between them.
Digi4u workshop notes
The OnePlus 11 and 12 are curved-panel repairs with the same rules as every curved flagship: tested assembly, even seating, and a fingerprint sensor test before sealing. The 12 is new enough that the repair is clearly worth doing; the 11 needs a value check.
¡ª Digi4u repair team ¡¤ reviewed by our in-house technicians (bench-tested, August 2026)
Conclusion
The OnePlus 11 and 12 are curved AMOLED repairs that reward a tested panel and even seating. Match the model, test the fingerprint sensor and refresh rate, and check the battery with the quote. Shops can order OnePlus 11 and 12 screens from Digi4u.
Frequently Asked Questions
Are OnePlus 11 and 12 screens curved?
Yes. Both use curved LTPO AMOLED panels with a 120 Hz refresh rate.
Can I use a OnePlus 11 screen on a OnePlus 12?
No. The two models use different panel sizes and connectors, so the parts are not interchangeable.
Why is my OnePlus 12 fingerprint sensor not working after the repair?
The under-display fingerprint sensor requires a compatible panel. Check the flex seating or confirm the panel supports the sensor.
