The Poco F5 uses a 6.67-inch AMOLED panel with a 120 Hz refresh rate, and the F6 uses a similar AMOLED with a stronger frame. A Poco F5 or F6 screen replacement means opening the phone, disconnecting the battery, and fitting a new AMOLED assembly while transferring the punch-hole camera. Digi4u stocks tested screens for both models.
Last updated: August 2026 ¡¤ Reviewed by the Digi4u repair team.
About this guide: based on hands-on bench testing and repair experience; confirm model specifications with the supplier before ordering.
Which Poco model do you have, and which panel fits it?
The Poco F5 uses a 6.67-inch AMOLED panel, while the Poco F6 uses a slightly different AMOLED panel with a different frame. Confirm the exact model before ordering, because the two models are not interchangeable.
| Model | Display | Repair note |
|---|---|---|
| Poco F5 | 6.67″ AMOLED, flat | Standard model |
| Poco F6 | AMOLED, flat | Separate part, stronger frame |
Both models use flat panels with 120 Hz refresh, which keeps fitting risk low. The F-series is Poco’s performance line, so customers often care about the display quality and are willing to pay for a good panel.
Common Poco F5 and F6 screen faults
The most common faults are cracked glass, lines or blotches after a drop, touch failure, and dead pixels. The flat AMOLED cracks at the corners and edges like any modern phone.
Lines and blotches point to panel damage, while a clean image under cracked glass usually still means a full assembly because of the bonded frame. Test in safe mode and rule out water damage before ordering. If the screen flickers at low brightness, the panel or its driver is the cause.
Poco F5 and F6 screen repair differences
The F-series is a flat AMOLED performance phone with a simple opening sequence and a screen-and-frame assembly. The model-specific points are the punch-hole camera transfer, the 120 Hz panel compatibility, and the in-display fingerprint sensor.
The punch-hole camera sits in the panel and must transfer cleanly, and the under-display fingerprint sensor requires a compatible panel. Because F-series owners often game on the phone, recommend a grade that keeps the 120 Hz experience clean, rather than the cheapest panel.
Post-repair testing checklist
Test the display, touch, the fingerprint sensor, the cameras, the proximity sensor and charging while the phone is open, and check the battery health before sealing. The full test sequence is listed in the screen repair tools and preparation guide.
The standard process
The standard screen replacement opens from the rear: isolate the battery first, release the assembly, fit the new part and test before resealing.
The full tool list is in the screen repair tools and preparation guide, and the opening technique is covered in the safe phone opening guide. The model-specific risks for this phone are covered above.
Digi4u workshop notes
The F-series is Poco’s gaming line, so the 120 Hz experience is the selling point. Our rule is to recommend a good AMOLED grade rather than the cheapest panel, because F-series customers notice the refresh and the colours. Test the fingerprint sensor and the refresh rate before sealing.
¡ª Digi4u repair team ¡¤ reviewed by our in-house technicians (bench-tested, August 2026)
Conclusion
The Poco F5 and F6 are clean flat AMOLED repairs when you confirm the exact model, transfer the punch-hole camera, and test the fingerprint sensor and refresh rate. Recommend a grade that keeps the 120 Hz experience clean. Shops can order Poco F-series screens from Digi4u.
Frequently Asked Questions
Is the Poco F5 screen flat or curved?
The Poco F5 uses a flat AMOLED panel, and the F6 uses a flat panel with a stronger frame.
Can I use a Poco F5 screen on a Poco F6?
No. The two models use different panels and frames, so the parts are not interchangeable.
Why is my Poco F5 fingerprint sensor not working after the repair?
The under-display fingerprint sensor requires a compatible panel. Check the flex seating or confirm the panel supports the sensor.
