The Mi 11 uses a curved AMOLED panel, while the Mi 11T uses a flat AMOLED panel, so the two models need different screens. A Xiaomi Mi 11 screen replacement is a curved-panel job, and the Mi 11T is a simpler flat repair. Digi4u stocks tested screens for both models.
Last updated: August 2026 ¡¤ Reviewed by the Digi4u repair team.
About this guide: based on hands-on bench testing and repair experience; confirm model specifications with the supplier before ordering.
Which Mi 11 model do you have, and which panel fits it?
The Mi 11 uses a 6.81-inch curved AMOLED panel with a 120 Hz refresh rate, while the Mi 11T uses a 6.67-inch flat AMOLED panel. The two models share no screen parts.
| Model | Display | Repair note |
|---|---|---|
| Mi 11 | 6.81" curved AMOLED | Curved panel, more care |
| Mi 11T | 6.67" flat AMOLED | Flat panel, simpler fitting |
Confirm the exact model before ordering, because the curved and flat panels are completely different parts. The Mi 11 Pro uses yet another panel, so check the full model name.
Common Mi 11 and 11T screen faults
The most common faults are cracked glass, lines or blotches after a drop, touch failure, and burn-in on heavily used panels. The curved Mi 11 cracks at the edges, while the flat 11T cracks at the corners.
Lines and blotches point to panel damage, while burn-in shows as ghost images on grey screens. Test in safe mode and rule out water damage before ordering. On both models, the punch-hole camera sits in the panel and must transfer cleanly.
Mi 11 and 11T screen repair differences
The Mi 11 is a curved AMOLED flagship, while the 11T is a flat AMOLED mid-range, so the two repairs differ in fitting risk and part price. The punch-hole camera and the in-display fingerprint sensor are common to both.
The curved Mi 11 panel must seat evenly to avoid light bleed, and the fingerprint sensor requires a compatible panel. Because these phones are older, match the repair price to the phone's current value and check the battery with the quote.
Post-repair testing checklist
Test the display, touch, the fingerprint sensor, the cameras, the proximity sensor and charging while the phone is open, and check the battery health before sealing. The full test sequence is listed in the screen repair tools and preparation guide.
The standard process
The standard screen replacement opens from the rear: isolate the battery first, release the assembly, fit the new part and test before resealing.
The full tool list is in the screen repair tools and preparation guide, and the opening technique is covered in the safe phone opening guide. The model-specific risks for this phone are covered above.
Digi4u workshop notes
The Mi 11 pair is another curved-versus-flat story: the 11T is a simple flat repair, and the Mi 11 is a curved panel that needs care. Confirm the full model name before ordering, because the Mi 11 Pro is a different part again. Test the fingerprint sensor and the curves before sealing.
¡ª Digi4u repair team ¡¤ reviewed by our in-house technicians (bench-tested, August 2026)
Conclusion
The Mi 11 and 11T are different repairs: a curved AMOLED flagship and a flat AMOLED mid-range. Match the panel to the exact model, test the fingerprint sensor and the curves, and check the battery with the quote. Shops can order Mi series screens from Digi4u.
Frequently Asked Questions
Does the Mi 11 use a curved screen?
Yes. The Mi 11 uses a curved AMOLED panel, while the Mi 11T uses a flat AMOLED panel.
Can I use a Mi 11 screen on a Mi 11T?
No. The two models use different panel sizes and shapes, so the parts are not interchangeable.
Why is my Mi 11 screen showing burn-in?
Burn-in is a normal ageing effect on OLED panels and appears as ghost images on grey screens. A replacement with a burn-in-tested panel avoids it.
