The Rise of No-Solder Face ID Repair for iPhone 13–15: A Major Shift in the Mobile Repair Industry
For years, Face ID failure on Apple iPhone 13 to iPhone 15 devices has been considered one of the most...
Suction Cup Not Good Enough to Open iPhone 12 or iPhone 13? Try This!
As we know that iPhone 12 and iPhone 13 screens sit all the way in the frame which makes it really hard to remove the screen with a suction cup. As you can see in the photo below, iPhone 11 Pro (Top) screen surface is a little bit higher than the frame while iPhone 13 Pro (Bottom) screen surface is at the same level as the top of the frame. You can mark the top of the frame by looking at the antenna.
iPhone 12 Pro Max
Now we have the solution, to make opening those screens quicker and easier for iPhone 12 and iPhone 13 series.
This machine has a universal platform mould which fits a series of iPhones. No need to adjust the machine or buy different sets, just pop the phone in and it will be secured in place. The platform is 18cm long and 9cm wide which makes it suitable for any future iPhones as well. With heating sensors and smart chips, the frame provides constant and precise heating for the glue to loosen up without damaging the inside of the mobile phone.
There are two suction cups equipped on the machine with strong vacuum power. While the bottom suction cup holds the phone in place, the top suction cup, the top suction up will stick to the screen and lift it up. The top cup is connected to an intelligent jacking and the jacking height can be controlled freely. This will help prevent the line from being damaged by lifting.
Big LCD screen to show you the process in a very neat and clear way without any confusion. Three buttons make the operation easy and convenient. If you have a clear idea of what you want, you can also switch from automatic to manual to use the machine more to your own desire.
After separating the screen, a simple button will pop the phone up to avoid touching any hot surface when taking the phone out.
Here are some specifications about this machine:
| Name | Automatic Intelligent Control Screen Removal |
| Model | 288 |
| Power | 400W |
| Voltage | 110-240V |
| Product Size | 42*30*21 cm |
| Net Weight | 9.2 kg |
| Package Size | 48*38*30 cm |
| Gross Weight | 15 kg |
Contact us to get it now:
https://www.digi4u.co.uk/index.php?route=information/contact
029 2036 0596
Related blogs
DIY Samsung Galaxy S26 Screen Replacement Guide Using Reliable Replacement Parts
If your Samsung Galaxy S26 screen is cracked, unresponsive, or showing display issues like dead pixels or flickering, replacing the...
EU 2027 Battery Rule Explained: What It Means for Phones and Repairs
Official Reference (Authoritative Source) EU Battery Regulation (EU) 2023/1542 (European Council press release): EU Batteries Regulation Overview What Is the...
