Google Pixel 8 & 8 Pro Screen Replacement Guide

The Pixel 8 and Pixel 8 Pro both use flat 120 Hz OLED panels, which makes this generation easier to repair than the curved Pixel 7 Pro. A Google Pixel 8 screen replacement means opening the phone, disconnecting the battery, and fitting a new OLED assembly while transferring the punch-hole camera. Digi4u stocks tested Pixel 8 screens.

Last updated: August 2026 ¡¤ Reviewed by the Digi4u repair team.

About this guide: based on hands-on bench testing and repair experience; confirm model specifications with the supplier before ordering.

Pixel 8 and 8 Pro panel specs

The Pixel 8 uses a 6.2-inch flat OLED with a 120 Hz refresh rate, while the 8 Pro uses a 6.7-inch flat LTPO OLED with a 120 Hz refresh rate. Both panels are flat, which keeps fitting risk low, but the models share no screen parts.

Model Display Repair note
Pixel 8 6.2″ OLED, flat, 120 Hz Standard model
Pixel 8 Pro 6.7″ LTPO OLED, flat, 120 Hz Larger panel, separate part

Confirm the exact model before ordering, because the 8 and 8 Pro use different sizes and connectors. Both use screen-and-frame assemblies, which is standard for modern Pixel repairs.

Common Pixel 8 and 8 Pro screen faults

The most common faults are cracked glass, lines or blotches after a drop, touch failure, and dead pixels. The flat panels crack at the corners and edges like any modern phone.

Lines and blotches point to panel damage, while a clean image under cracked glass usually still means a full assembly because of the bonded frame. Rule out water damage before ordering and test in safe mode. If the screen flickers at low brightness, the panel or its driver is the cause.

Pixel 8 screen repair differences

The Pixel 8 generation is one of the easier Google repairs because both panels are flat and the opening sequence is standard. The model-specific points are the punch-hole camera transfer, the under-display fingerprint sensor, and the 120 Hz panel compatibility.

The opening sequence is: heat the back glass, release the adhesive, disconnect the battery first, then release the display flexes. The flat panel seats easily, and the fingerprint sensor test is part of the post-repair checklist.

Post-repair testing checklist

Test touch across the full screen, brightness, the punch-hole camera, the fingerprint sensor, the earpiece, the proximity sensor and the microphones. Confirm the 120 Hz refresh feels smooth and check the display at low brightness for flicker.

Run the full test while the phone is open. If the fingerprint sensor fails, the flex is not seated or the panel is incompatible.

The standard process

The standard screen replacement opens from the rear: isolate the battery first, release the assembly, fit the new part and test before resealing.

The full tool list is in the screen repair tools and preparation guide, and the opening technique is covered in the safe phone opening guide. The model-specific risks for this phone are covered above.

Digi4u workshop notes

The Pixel 8 generation is the cleanest Google repair of recent years because both panels are flat. The steps that matter are the punch-hole camera transfer and the fingerprint sensor test. It is a good practice repair for a technician moving from Samsung to Google.
¡ª Digi4u repair team ¡¤ reviewed by our in-house technicians (bench-tested, August 2026)

Conclusion

The Pixel 8 and 8 Pro are straightforward flat OLED repairs when you confirm the model, transfer the punch-hole camera, and test the fingerprint sensor and 120 Hz refresh before sealing. Shops can order Pixel 8 series screens from Digi4u.

Frequently Asked Questions

Is the Pixel 8 Pro screen curved?

No. The Pixel 8 and 8 Pro both use flat OLED panels, which keeps fitting risk lower than the curved Pixel 7 Pro.

Can I use a Pixel 8 screen on a Pixel 8 Pro?

No. The two models use different panel sizes and connectors, so the parts are not interchangeable.

Why is my Pixel 8 fingerprint sensor not working after the repair?

The under-display fingerprint sensor requires a compatible panel. Check the flex seating or confirm the panel supports the sensor.

Scroll to Top