i2c Face ID Repair-Dot Projector Reprogrammer Kit For iPhone X-11 Pro Max i2c Face ID Repair-Dot Projector Reprogrammer Kit For iPhone X-11 Pro Max i2c Face ID Repair-Dot Projector Reprogrammer Kit For iPhone X-11 Pro Max i2c Face ID Repair-Dot Projector Reprogrammer Kit For iPhone X-11 Pro Max i2c Face ID Repair-Dot Projector Reprogrammer Kit For iPhone X-11 Pro Max i2c Face ID Repair-Dot Projector Reprogrammer Kit For iPhone X-11 Pro Max i2c Face ID Repair-Dot Projector Reprogrammer Kit For iPhone X-11 Pro Max
i2c Face ID Repair-Dot Projector Reprogrammer Kit For iPhone X-11 Pro Max
i2c Face ID Repair-Dot Projector Reprogrammer Kit For iPhone X-11 Pro Max
i2c Face ID Repair-Dot Projector Reprogrammer Kit For iPhone X-11 Pro Max
i2c Face ID Repair-Dot Projector Reprogrammer Kit For iPhone X-11 Pro Max
i2c Face ID Repair-Dot Projector Reprogrammer Kit For iPhone X-11 Pro Max
i2c Face ID Repair-Dot Projector Reprogrammer Kit For iPhone X-11 Pro Max
i2c Face ID Repair-Dot Projector Reprogrammer Kit For iPhone X-11 Pro Max

i2c Face ID Repair-Dot Projector Reprogrammer Kit For iPhone X-11 Pro Max

  • £182.23

Product Code: php-tls-i2c-faceid-repair

Availability: 3

Specification/Attribute

Share To Social Media

  • social icon
  • social icon
  • social icon
  • social icon
  • social icon
Product description: 
I2C Dot Projector Repair Tools And Materials Kit For iPhone X-11 Pro Max
This kit is for the Face ID dot projector repair
For now, the most cost-effective and efficient Face ID repair method

Features
1. Offline read & write
2. Support models: For iPhone X/XR/XS/XS Max/11/11 Pro/11 Pro Max
3. Support Chinese & English menu switch
4. Non-trace repair, green pass the 3UTools
5. Chip non-removal low repair risk
6. Low power consumption and no current leakage
7. Can be adapted to the latest iOS system perfectly

Operation Process
1. Connect with the original flex cable, press the ‘Test’ button to test the flex cable condition
2. Press the ‘Read’ button to read and save the data (Do not power off during the operation process to avoid loss of data )
3. Connect the i2C dot projector flex cable with the host machine, then press ‘Write’ button to write the data.
    (Do not power off during the operation process to avoid loss of data)
4. Cut off the shielding cover soldering joint pads with grinding pen
5. Heat with a hot air gun and separate the dot projector board from the glass lens with a sculpture knife
6. Take down the MOSFET then short the pin as shown in the figure
7. Reball the pads on the flex cable
8. Apply solder paste then solder the dot projector board to the flex cable
9. Test the flex cable working condition after the soldering
10. Put the flex cable into the shielding cover and keep the flex well aligned with the glass lens

Package includes: 
1 × i2c Face ID Dot Projector Repair Host Machine
7 × Dot projector cables




There are no reviews for this product.